Heat-Fab 93WMSTLH Stainless Steel Saf-T Vent Seal 3" Saf-T Vent Seal Weil-Mclain GV2 Elbow/Horizontal Adapter 93WMSTLH

Heat-Fab 93WMSTLH Stainless Steel Saf-T Vent Seal 3" Saf-T Vent Seal Weil-Mclain GV2 Elbow/Horizontal Adapter 93WMSTLH

3" Weil-Mclain GV2 Elbow/Horizontal AdapterSaf-T Vent Seal is manufactured entirely of AL 29-4C superferritic stainless steel. We won?Æt compromise performance with conventional alloys anywhere in the system. Laser butt seam welds and advanced resistance-welded fittings leave walls smooth inside, to minimize friction and resistance, and prevent collection of combustion by-products. Saf-T Vent Seal is UL 1738/ULC S636 and is Listed to meet all code requirements for condensing and positive pressure special gas vent systems.Saf-T Vent Seal speeds installation on any job. Since no curing is required, Seal allows the appliance to be started as soon as the installation is complete.Easy to install, because the seal s built right in.Engineered for fast, secure installation.Reliable performance.Manufactured using AL429-4C Stainless Steel.

Speedi-Products FD-25R6 09 9-Inch Diameter by 25-Feet Length R6 Insulated Flexible Duct with Metalized Jacket

Speedi-Products FD-25R6 09 9-Inch Diameter by 25-Feet Length R6 Insulated Flexible Duct with Metalized Jacket

• R6 fiberglass insulation for improved energy efficiency & noise absorption
• Polyethylene sleeve separates airflow from insulation
• Cut to length for each specific application
• Can be used in Supply, Return and standard exhaust applications
• Not for use in Kitchen Hood Exhaust systems

Speedi-Products 9-Inch by 25-Feet Insulated Flexible Duct R6 Metalized Jacket is used in HVAC Heating and Air Conditioning systems and venting applications. This insulated R4 rated class 1 air duct comes with a polyethylene sleeve and black poly exterior jacket. The duct is ETL listed, meeting the UL181 standard.

Amerimax Home Products 4" Mf Galv End/Drop 15010 4" K-Style Steel Gutter Systems

Amerimax Home Products 4" Mf Galv End/Drop 15010 4" K-Style Steel Gutter Systems

• Amerimax Home #15010 4" MF Galvanized End/Drop
• AMERIMAX HOME PRODUCTS

4", Mill Finish Galvanized Steel End Piece With Drop For 4" Gutter.

Speedi-Boot SBH-6107 FB 6-Inch Width by 10-Inch Length to 7-Inch Diameter 45-Degree Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-6107 FB 6-Inch Width by 10-Inch Length to 7-Inch Diameter 45-Degree Register Vent Boot with Adjustable Hangers

• Adjustable telescoping hanger arms that can be shortened as well
• Foam gasket seals air tight at installation to back of sheetrock
• Dust and debris cover prevents construction contamination
• Mud ring prevents gaps between the boot and sheetrock
• Dust and debris cover provides a plug for HVAC pressure testing

Speedi-Boot allows you to Save Time, Labor, Money, and Energy with one simple installation. Speedi-Boot reduces installation time from 15 minutes or greater to under 2 minutes. Speedi-Boot eliminates the need to install wood or prefab steel support framing saving the cost of additional materials and labor to fabricate. With one trip up the ladder for ceiling/wall installations, simply extend the telescoping arms, fasten with the pre-attached nail and/or screw into place, adjust the positioning and you're done. Mounting holes are provided in mud ring frame to securely attach the register grille which eliminates sagging. The air tight foam gasket eliminates air leakage saving you money and energy. Studies have shown that a simple 1/2-Inch space in your HVAC system is equal to a 20-Inch hole in the side of your house. SpeediBoot prevents dust and debris contamination in HVAC systems during construction, which improves indoor air quality and saves energy. Do it yourself, Residential/Commer

Amerimax Home Products 3X4 Mf Galv B Elbow 49065 5" K-Style Steel Gutter Systems

Amerimax Home Products 3X4 Mf Galv B Elbow 49065 5" K-Style Steel Gutter Systems

• Amerimax Home #49065 3x4 MF Galvanized B Elbow
• AMERIMAX HOME PRODUCTS

3' x 4', Mill Finish Galvanized Steel Front Elbow, Style B, 75 Degree.

Heat-Fab CCL20RJ Stainless Steel Saf-T Vent CI+ 20" Saf-T Vent CI+ Roof Jack Support System CCL20RJ

Heat-Fab CCL20RJ Stainless Steel Saf-T Vent CI+ 20" Saf-T Vent CI+ Roof Jack Support System CCL20RJ

20" Roof Jack Support SystemOEM s have specified Saf-T Vent for more than 15 years. Saf-T Vent was the first Venting System using AL-429C superferritic stainless steel to test and list to UL1738 S636 (Special Gas Vent Systems). The combination of high quality products and our engineering support system ensures your installation has high performance quality from adapter to termination.CI+ Engineering gives the greatest flexibility to your system specs. It s 1-inch airspace not only reduces required clearance to combustibles, it also reduces vent skin temperature for safer maintenance conditions.Reduced clearance to combustibles.Strong mechanical joint locks in place.Integral seal allows fast installation with no RTV.Tested and listed to UL 1738 (Special Gas Vent) and ULC-S636 (Type BH Gas Vent) in Canada.Manufactured using AL429-4C Stainless Steel.

12"W x 18"H Cathedral Gable Vent Louver, Functional

12"W x 18"H Cathedral Gable Vent Louver, Functional

• Material: Urethane

12"W x 18"H Cathedral Gable Vent Louver, Functional

Broan 356BR1600 CFM Roof Mount Powered Attic Ventilator, Brown PVC Dome

Broan 356BR1600 CFM Roof Mount Powered Attic Ventilator, Brown PVC Dome

• 8.0 Amps 1600 CFM for up to 2285 square feet of attic space
• Precision balanced 14-Inch metal blade for maximum air flow and minimum sound level with PVC plastic dome provides ultraviolet protection and superior durability
• 23 gage metal flashing - allows for nailing and hot tar application and mesh bird screen
• Built-in adjustable thermostat - for automatic operation at your chosen temperature level and thermally protected and permanently lubricated motor
• Mounts easily between rafters - installation template included

Broan 356B Roof Mounted Powered Attic Ventilator Attic Size: up to 2285 sq. ft. Amps: 8.0 CFM: 1600 Height: 8" Dome Diameter: 23-1/4" Dome Material: PVC

Stormguard Film Surface Leak Barrier

Stormguard Film Surface Leak Barrier

Film surface link barrier with special adhesive for one-time repositioning, but aggressively adheres over time. Unique film surface pattern improves footing even in hot weather. Self seals around nails or metal roofing fasteners. Split back release filmpeels off in layers for faster installation and greater homeowner value. Fiberglass reinforcement helps resist wrinkling and buckling. Lays flatter under shingles. Design to withstand high metal roof temperatures and will not melt or flow. Can be exposedfor up to 60 days if necessary.

Speedi-Products FD-12R8 08 8-Inch Diameter by 12-Feet Length R8 Insulated Flexible Duct with Metalized Jacket

Speedi-Products FD-12R8 08 8-Inch Diameter by 12-Feet Length R8 Insulated Flexible Duct with Metalized Jacket

• R8 fiberglass insulation for improved energy efficiency & noise absorption
• Polyethylene sleeve separates airflow from insulation
• Cut to length for each specific application
• Can be used in Supply, Return and standard exhaust applications
• Ideal for duct systems within the conditioned space

Speedi-Products 8-Inch by 12-Feet Insulated Flexible Duct R8 Metalized Jacket is used in HVAC Heating and Air Conditioning systems and venting applications. This insulated R4 rated class 1 air duct comes with a polyethylene sleeve and Metalized exterior jacket. The duct is ETL listed, meeting the UL181 standard.

Slider 2" 24 ga. top - 18 ga. base ($.42 ea.) Carton of 500

Slider 2" 24 ga. top - 18 ga. base ($.42 ea.) Carton of 500

• Carton of 500
• Top constructed of 24 ga. metal
• Bottom constructed of 18 ga.metal
• Full 1" thermal movement from center

Carton of 500 clips. 2" Slider 24 ga. top - 18 ga. base ($ .42 ea.) Fits most 2" panels. Full 1" thermal movement from center.

Speedi-Collar SC-10D 10-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections

Speedi-Collar SC-10D 10-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections

• Speedi-Collar is made in the USA
• Saves time, labor, energy, and money with all the innovations Speedi-Collar has to offer
• The damper ratchet system allows you to adjust the damper into 6 different positions for optimal balancing
• Speedi-Collar features an integral gasket, a 3/4-Inch wide flange and quick-zips for an air-tight connection
• Speedi-Collar is molded from high density, UV resistant resin making it durable, lightweight, dent and rust-proof

Speedi-Collar is the innovative energy efficient and time saving Start Collar alternative you've been waiting for. This revolutionary start-collar features an adhesive gasket that attaches to duct board or metal trunk lines. The patented Quick-Zips tighten to create a virtually air tight seal. Therefore there are no added sealants that are required unlike a standard start-collar. The patented Quick-Zip mounting reduces installation time from 10 mins plus down to a minute or less. And if you pre-attach the flex duct, you can be out of the attic or crawl space in minutes, not hours. The collar was designed with the Quick-Zips located on the outside of the collar flange. You won't have to stick your hand inside a sharp metal collar ever again. There are no sharp tabs to bend back which take time and can cause serious painful injuries. It is the fastest way to connect duct to trunk lines or to the main HVAC unit. It is the "One Collar that Fits All". It can be used with 1-Inch, 1.5-Inch an

Dundas Jafine BPMH4WZW6 ProMax 4-Inch Exhaust Hood, White

Dundas Jafine BPMH4WZW6 ProMax 4-Inch Exhaust Hood, White

• Snug fit back draft damper helps prevent cold air, snow or rain from entering the home
• Damper has been designed for superior noise reduction
• Removable pest screen that helps to keep pests out and allows for easy cleaning of the duct
• Snap on pipe to cap assembly that eliminates the need for lint trapping staples
• UV resistant coating to prevent the cap from discoloring; Paintable

Professional series, 4'' wide mouth cap with 4'' diameter aluminum pipe. Cap is equipped with removable pest screen designed to keep birds and other pests from burrowing in dryer exhaust vents. Premium airflow allows for better operating efficiency and low energy consumption. Vent hood easily mounts on brick, concrete, and siding. UV resistant plastic can be painted to match exterior. White.

13" x 13" Lock-Top Ii Chimney Cap/damper, 5/8" Mesh

13" x 13" Lock-Top Ii Chimney Cap/damper, 5/8" Mesh

• 13" x 13" Lock-Top Ii Chimney Cap/damper
• 5/8" Mesh

13" x 13" Lock-Top Ii Chimney Cap/damper, 5/8" Mesh

Heat-Fab CCA06VTS Stainless Steel Saf-T Vent CI+ 6" Saf-T Vent CI+ 1" Clearance Support CCA06VTS

Heat-Fab CCA06VTS Stainless Steel Saf-T Vent CI+ 6" Saf-T Vent CI+ 1" Clearance Support CCA06VTS

6" 1" Clearance SupportOEM s have specified Saf-T Vent for more than 15 years. Saf-T Vent was the first Venting System using AL-429C superferritic stainless steel to test and list to UL1738 S636 (Special Gas Vent Systems). The combination of high quality products and our engineering support system ensures your installation has high performance quality from adapter to termination.CI+ Engineering gives the greatest flexibility to your system specs. It s 1-inch airspace not only reduces required clearance to combustibles, it also reduces vent skin temperature for safer maintenance conditions.Reduced clearance to combustibles.Strong mechanical joint locks in place.Integral seal allows fast installation with no RTV.Tested and listed to UL 1738 (Special Gas Vent) and ULC-S636 (Type BH Gas Vent) in Canada.Manufactured using AL429-4C Stainless Steel.

6" X 20' Plastic Mesh Gutter Guard

6" X 20' Plastic Mesh Gutter Guard

6" X 20' Plastic Mesh Gutter Guard

Speedi-Collar SC-05D 5-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections

Speedi-Collar SC-05D 5-Inch Diameter Take Off Start Collar with Damper for Hvac Duct Work Connections

• Speedi-Collar is made in the USA
• Saves time, labor, energy, and money with all the innovations Speedi-Collar has to offer
• The damper ratchet system allows you to adjust the damper into 6 different positions for optimal balancing
• Speedi-Collar features an integral gasket, a 3/4-Inch wide flange and quick-zips for an air-tight connection
• Speedi-Collar is molded from high density, UV resistant resin making it durable, lightweight, dent and rust-proof

Speedi-Collar is the innovative energy efficient and time saving Start Collar alternative you've been waiting for. This revolutionary start-collar features an adhesive gasket that attaches to duct board or metal trunk lines. The patented Quick-Zips tighten to create a virtually air tight seal. Therefore there are no added sealants that are required unlike a standard start-collar. The patented Quick-Zip mounting reduces installation time from 10 mins plus down to a minute or less. And if you pre-attach the flex duct, you can be out of the attic or crawl space in minutes, not hours. The collar was designed with the Quick-Zips located on the outside of the collar flange. You won't have to stick your hand inside a sharp metal collar ever again. There are no sharp tabs to bend back which take time and can cause serious painful injuries. It is the fastest way to connect duct to trunk lines or to the main HVAC unit. It is the "One Collar that Fits All". It can be used with 1-Inch, 1.5-Inch an

Speedi-Products EX-HJBB 04 4-Inch Diameter Hood J-Block, Brown

Speedi-Products EX-HJBB 04 4-Inch Diameter Hood J-Block, Brown

• Speedi-Exhaust Products are made in the USA
• The J-Block design has a reversible trim ring to accomodate brick, siding and stucco applications
• Weighted damper prevents wind noise and animal entry.
• Seal joints with approved duct mastic sealants and tapes
• Consult your local building codes for approved installation practices

Speedi-Products 4-Inch Brown J Block Vent Hood with 11-Inch Tail Pipe for Brick, Siding and Stucco Applications. Weighted design helps prevent wind noise and animal entry. Can be used for Remodeling, Do it yourself and New Residential projects.

Lambro Industries 4' Wht Dryer Vent Hood 224Ws Dryer Hood Vents

Lambro Industries 4' Wht Dryer Vent Hood 224Ws Dryer Hood Vents

• 4".
• Preferred dryer hood vent.
• Plastic face with standard aluminum tailpiece.
• With tail piece & removable screen/sleeve.
• Color : White.

4', White, Preferred Dryer Vent Hood, With Tail Piece & Removable Screen/Sleeve.

Solar Attic Roof Fan Retrofit Kit for Installing on NorWesCo RVO38 Metal Vents - Solar RVOblaster Kit

Solar Attic Roof Fan Retrofit Kit for Installing on NorWesCo RVO38 Metal Vents - Solar RVOblaster Kit

• Solar-powered roof and attic ventilation fan (retrofit kit)
• Retrofits onto a NorWesCo RVO38 8" metal roof vent
• Panel: 3W solar panel
• Fan: 2 ball bearing; 2700rpm; 39cfm; rated for 50,000hr
• No attic access required to install

This patent-pending, solar-powered roof fan retrofits into an 8" metal NorWesCo RVO38 roof vent. The fan snaps inside the vent and the solar panel is attached to the top of the vent hood. An ideal ventilation choice for any home that does not currently have any powered roof vents and your home already has the NorWesCo vents installed on their roofs. Trapped heat and moisture in one's attic, not only diminishes the comfort of one's home environment, but they also reduce the life expectancy of your entire roof and your insulation. CONTENTS OF THE RETROFIT KIT: The Solar RVOblasterTM Kit comes with a 3W solar panel attached to a two ball bearing, 2700rpm, 39cfm fan that is rated for 50,000 hours. The fan is attached to our patent-pending Solar Blaster bracket which snaps into a NorWesCo 8" RVO38 metal vent (vent is NOT included). Also in the kit are four unique, stainless steel clips to secure the solar panel to the vent hood. Installation instructions are included. Installation is ver

Hy-C Company Inc Steel Chimney Cover Blk Cbc913 Chimney Caps

Hy-C Company Inc Steel Chimney Cover Blk Cbc913 Chimney Caps

• Hy-C #CBC913 Steel Chimney Cover Black
• HY-C COMPANY INC

Black Steel Chimney Cover, 5/8" Expanded Galvanized Steel Mesh For California Requirements, Fits Outside Tile Size 7-1/2"x 11-1/2" To 9-1/2"x 13-1/2".

Speedi-Boot SBH-161612 SRA 16-Inch Width by 16-Inch Length to 12-Inch Diameter Square-to-Round Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-161612 SRA 16-Inch Width by 16-Inch Length to 12-Inch Diameter Square-to-Round Register Vent Boot with Adjustable Hangers

• Adjustable telescoping hanger arms that can be shortened as well
• Foam gasket seals air tight at installation to back of sheetrock
• Dust and debris cover prevents construction contamination
• Mud ring prevents gaps between the boot and sheetrock
• Dust and debris cover provides a plug for HVAC pressure testing

Speedi-Boot allows you to Save Time, Labor, Money, and Energy with one simple installation. Speedi-Boot reduces installation time from 15 minutes or greater to under 2 minutes. Speedi-Boot eliminates the need to install wood or prefab steel support framing saving the cost of additional materials and labor to fabricate. With one trip up the ladder for ceiling/wall installations, simply extend the telescoping arms, fasten with the pre-attached nail and/or screw into place, adjust the positioning and you're done. Mounting holes are provided in mud ring frame to securely attach the register grille which eliminates sagging. The air tight foam gasket eliminates air leakage saving you money and energy. Studies have shown that a simple 1/2-Inch space in your HVAC system is equal to a 20-Inch hole in the side of your house. SpeediBoot prevents dust and debris contamination in HVAC systems during construction, which improves indoor air quality and saves energy. Do it yourself, Residential/Commer

Speedi-Products SM-W3128 NB 12-Inch Width by 3.25-Inch to 8-Inch Width Stack 90-Degree Boot

Speedi-Products SM-W3128 NB 12-Inch Width by 3.25-Inch to 8-Inch Width Stack 90-Degree Boot

• 8-Inch Wall Stack 90 Degree Boot
• For transitioning Rectangular Wall Stack ducting to Round Sheet Metal Pipe
• For interior wall supply and return air ducts
• Seal joints with approved duct mastic sealants
• Insulate Ductwork for improved energy efficiency and comfort

Speedi-Products 8-Inch Wall Stack 90-Degree Boot for transitioning Rectangular Wall Stack ducting to Round Sheet Metal Pipe. Used for interior wall supply and return air ducts. Can be used for Remodeling, Do it yourself and New Residential projects.

Amerimax Home Products 33202 Galvanized Outside Mitre

Amerimax Home Products 33202 Galvanized Outside Mitre

• AMERIMAX HOME PRODUCTS
• Amerimax Home #33202 5"WHT Galvanized OutsideMitre

K style outside steel mitre/corner provides 2 pieces of gutter to continue along and outside roofline junction. This requires 2 seamers or slip joints to make the connections. Install with screws or pop rivets. Outside mitre/corner continues water flow to outlet.

Rollex 14X50 Acrylic Aluminum Trim Coil

Rollex 14X50 Acrylic Aluminum Trim Coil

• .019 Aluminum Coil Stock
• aluminum coil stock siding alu

Coated 2 sides. Smooth finish. .019 gauge aluminum. 14'' x 50'. Each roll individually cartoned.